Happy Fourth of July from Swanson Flo

"We hold these truths to be self-evident, that all men are created equal, that they are endowed by their Creator with certain unalienable Rights, that among these are Life, Liberty and the pursuit of Happiness. — That to secure these rights, Governments are instituted among Men, deriving their just powers from the consent of the governed, — That whenever any Form of Government becomes destructive of these ends, it is the Right of the People to alter or to abolish it, and to institute new Government, laying its foundation on such principles and organizing its powers in such form, as to them shall seem most likely to effect their Safety and Happiness."

THOMAS JEFFERSON, Declaration of Independence

A Look Inside the Cashco Ranger QCT Industrial Control Valve

Cashco Ranger QCT
Industrial Control Valve

The Cashco Ranger is one of the most popular industrial control valves on the market. It is the most versatile, adaptable, and easily maintainable valve ever produced. No other valve is more user friendly.

The Ranger offers over 6 different trim combinations. Trim can easily be changed in less than 5 minutes without disturbing the packing, actuator, or positioner calibration. The service area is a thread-less design, which resists corrosion or collection of chemical deposits.

A selection of 3 body materials with a broad temperature range from -325°F to +750°F makes the Ranger adaptable for use in steam, heat transfer fluids, slurries, gases, liquids, and cryogenic applications. The Ranger’s unique dual seating design provides both Class VI and backup Class IV seat leakage. And the standard patented live-loaded packing system lets you check and adjust packing without the need for specialized tools or complicated procedures.

Check out the video below for a detailed look. For more information, visit Swanson Flo at http://www.swansonflo.com or call (510) 274-1990.

Lined Industrial Valves for Corrosive Service

Lined Plug Valves
(courtesy of Flowserve Durco)

Lined valves use a fluoropolymer, plastic, or ceramic lining applied to all wetted internal parts of the valve.

Lined valves combine the excellent mechanical properties of metallic bodies with the corrosion resistance of fluorocarbons, such as PFA and PTFE.

Lining the intricately shaped inside surfaces of a valve is certainly an engineering challenge, especially to achieve a uniform thickness and the highest lining quality, without cavities or inclusions.

Lined ball and swing check valve
(courtesy of Flowserve Atomac)

The special lining process guarantees tight bonding between the lining and the inside of the body.
This effectively prevents the lining from shearing off the body in part or being removed completely.

Ideal applications include highly corrosive applications within the chemical processing industry such as sulfuric and hydrochloric acid.

Lined valves are ideally suited for corrosive applications, requiring very reliable performance, tight shutoff, constant torque and no maintenance. These valves have gained extensive usage in many industries including power generation, pulp and paper, refineries, chemical process, pharmaceutical/bioprocessing and pollution control.

For more information on lined valves, visit Swanson Flo at http://www.swansonflo.com or call 800-288-7926.

Magnetic Flowmeters (Magmeters): Principles and Applications

Magnetic flowmeter (Foxboro)

Crucial aspects of process control include the ability to accurately determine qualities and quantities of materials. In terms of appraising and working with fluids (such as liquids, steam, and gases) the flowmeter is a staple tool, with the simple goal of expressing the delivery of a subject fluid in a quantified manner. Measurement of media flow velocity can be used, along with other conditions, to determine volumetric or mass flow. The magnetic flowmeter, also called a Magmeter, is one of several technologies used to measure fluid flow.

In general, magnetic flowmeters are sturdy, reliable devices able to withstand hazardous environments while returning precise measurements to operators of a wide variety of processes. The magnetic flowmeter has no moving parts. The operational principle of the device is powered by Faraday's Law, a fundamental scientific understanding which states that a voltage will be induced across any conductor moving at a right angle through a magnetic field, with the voltage being proportional to the velocity of the conductor. The principle allows for an inherently hard-to-measure quality of a substance to be expressed via the Magmeter. In a Magmeter application, the meter produces the magnetic field referred to in Faraday's Law. The conductor is the fluid. The actual measurement of a magnetic flowmeter is the induced voltage corresponding to fluid velocity. This can be used to determine volumetric flow and mass flow when combined with other measurements.

The magnetic flowmeter technology is not impacted by temperature, pressure, or density of the subject fluid. It is however, necessary to fill the entire cross section of the pipe in order to derive useful volumetric flow measurements. Faraday's Law relies on conductivity, so the fluid being measured has to be electrically conductive. Many hydrocarbons are not sufficiently conductive for a flow measurement using this method, nor are gases.

Magmeters apply Faraday's law by using two charged magnetic coils; fluid passes through the magnetic field produced by the coils. A precise measurement of the voltage generated in the fluid will be proportional to fluid velocity. The relationship between voltage and flow is theoretically a linear expression, yet some outside factors may present barriers and complications in the interaction of the instrument with the subject fluid. These complications include a higher amount of voltage in the liquid being processed, and coupling issues between the signal circuit, power source, and/or connective leads of both an inductive and capacitive nature.

In addition to salient factors such as price, accuracy, ease of use, and the size-scale of the flowmeter in relation to the fluid system, there are multiple reasons why Magmeters are the unit of choice for certain applications. They are resistant to corrosion, and can provide accurate measurement of dirty fluids - making them suitable for wastewater measurement. As mentioned, there are no moving parts in a Magmeter, keeping maintenance to a minimum. Power requirements are also low. Instruments are available in a wide range of configurations, sizes, and construction materials to accommodate various process installation requirements.

As with all process measurement instruments, proper selection, configuration, and installation are the real keys to a successful project. Share your flow measurement challenges of all types with a process measurement specialist, combining your process knowledge with their product application expertise to develop an effective solution.

The video below provides additional information about magnetic flowmeters.

Your Partner for Process Control Automation: Swanson Flo

Founded in 1960, Swanson Flo has long maintained our position as an industry leader in process automation with unmatched project success leveraging industry preferred products and services.

Our mission is to provide innovative process control solutions for engineers, managers and maintenance professionals through quality equipment and experienced application engineering. These efforts combined with excellent aftermarket service yield reduced operating costs and improved production. Visit http://www.swansonflo.com or call 800-288-7926.

Ashcroft Awards Swanson Flo Coveted "Distributor of Distinction Award"

For the fourth consecutive year, pressure and temperature instrument manufacturer Ashcroft, Inc. named Swanson Flo of Plymouth Minnesota the Ashcroft "Distributor of Distinction" for 2016. This award recognizes and honors Ashcroft Distributors who deliver exceptional growth, revenue, and commitment, and stands as Ashcroft's most respected and highest honor for their Distributors.

Swanson stood out from the pack in 2016 with a 17% increase in bookings over their previous year, despite a very tough economy for industrial distribution. Swanson Flo attributes the increase to their focus on developing new business at targeted accounts, increasing the size of their sales force, and turning up new applications at existing accounts.

From left to right:  Bill Johnson, Sales Manager, Western Division;

Robbin Jensen, Insides Sales Manager; Tom Howe, Owner/CEO,

Sandy Grinvalds, Ashcroft; and Sid Sondag, Director Sales & Marketing.

The Advantages of the Sliding Gate Control Valve Seat in Process Control

Sliding Gate Control Valve Seat (Jordan)

Fluid flow control in a process can present a number of challenges, large and small. In addition to selecting a properly sized control valve, your choice of trim design can contribute noticeably to overall positive performance. One candidate for fluid flow control is the sliding gate valve.

The trim of a sliding gate valve essentially consists of a fixed disc and a movable plate installed directly in the flow path. The disc and plate have precisely located and sized perforations, slots, or other openings. The valve actuation mechanism slides the plate across the face of the disc, progressively changing the alignment of the openings in the plate and fixed disc. This type of design can bring some benefits to the process and user:

• Short stroke length provides fast response, reduces wear on packing and diaphragm, allows for a compact installed assembly
• Straight-through flow pattern reduces turbulence, noise, erosion, valve chatter, and cavitation
• Ease of maintenance, with fewer trim components that are easily changed
• Self cleaning, self lapping seats

The video below provides a clear illustration of how the sliding gate valve trim works, through animation and exploded views of the valve components. Share your fluid flow control challenges with a valve specialist and combine your process expertise with their product application knowledge for an effective solution.