- Multi-parameter measurement: flow, temperature, and pressure in one instrument
- Simple and secure connection through Bluetooth and comprehensive App
- Superior accuracy through onboard gas database and real time conversions
- NAMUR status indication keeps you informed about your process
- Adaptable to many applications through wide dynamic range of measurement and control
- Dynamic flow ranges up to 1:1000
Mass Flow Measurement of low flow rates, independent of fluid properties.
With the development of the mini CORI-FLOW™ series Bronkhorst achieved a technological breakthrough in Coriolis mass flow measurements and control, by realizing a compact, cost-effective Coriolis Mass Flow Meter/Controller for accurate measurement and control of (very) low flow rates. The unique design of the miniature Coriolis sensor features unsurpassed performance, even with changing operating conditions in pressure, temperature, density, conductivity and viscosity.
Contrary to many other Coriolis flow meters on the market, mini CORI-FLOW™ offers integrated PID control and close-coupled control valves or pumps, thus constituting very compact, cost- and space-saving, precise Coriolis Mass Flow Controllers.
Accurate Dosing of Corrosion Inhibitors Greatly Improves Corrosion Prevention and Extends Pipeline Life
A corrosion inhibitor system will add small concentrations of (bio)chemicals into the process which form a film on the interior surface of the pipe or vessel, preventing corrosive attack. The effectiveness of an inhibitor system greatly depends on the correct injection amount, and can be influenced by the environmental and process conditions; so accuracy is crucial here. A properly applied chemical corrosion inhibitor system is very effective in lowering corrosion rates, with the potential to reduce corrosion rates up to 99%.
The key in determining the overall rate of corrosion over the life of a pipeline is determined by the proportion of time for which the corrosion inhibitor is available, and the correct concentration. In order to accurately assess the availability of corrosion inhibitor, it is necessary to have some means of accurately measuring the dosage of inhibitor being injected.
Using a low flow control system containing a mass flow controller (MFC) allows for very accurate corrosion inhibitor dosing. High accuracy and high turndown ratio is achieved based on pure mass flow measurement with this type of flow meter. A device such as the Bronkhorst (mini) CORI-FLOW mass flow controller can directly control valves and pumps via it's on-board PID controller, and be further optimized with ancillary PLC and HMI controls, extending both performance and flexibility.
The application of chemical corrosion inhibitors can significantly reduce the rate of corrosion and using a dosing system with an integrated MFC (such as the Bronkhorst (mini) CORI-FLOW) enables real-time monitoring, control and logging of injection rates. This allows online checking of flow rates and instantaneous re-setting of the required flow rate. Asset management and preventive maintenance is supported with several active diagnostics.
For more information about mass flow controllers used in chemical dosing applications, contact Swanson Flo by calling 800-288-7926 or visit https://swansonflo.com.
For your convenience, below is the instruction manual for mass flow meters and controllers.
Contact Swanson Flo at 800-288-7926 or visit http://www.swansonflo.com for more information on Bronkhorst products.